High-Strength H Pile & HP Bearing Piles Supply for Deep Foundations

AGICO Supplies Full range of H pile steel grades, sizes, and fabrication options for driven, pre-bored and socketed H Pile applications.

Get a Quote

Hot Rolled H Piles For Sale

AGICO is an experienced structure steel supplier, customer can buy H Piles and HP Bearing Piles in a full range of sizes suitable for marine structural and other applications. Their robust, durable cross-sections enable excellent drivability even in complex soil layers and rocky terrain.

What AGICO Offers

H Piles Specifications

Section Type: H section
Dimensions: According to H-Pile Standard
Pile Length: 12m, 15m, or cut to length
Cross-Sectional Area: 80 cm2~ 368 cm2
Weight: 63kg/m ~ 604 kg/m
Yield Strength: 235 Mpa – 460 Mpa
End Condition: Square cut, Beveled for welding, Splice Plates, Driving Point (conical tip / welded shoe).
Surface Condition: Mill finish, Blasted SA2.5, Primed coating, Hot-dip galvanized.

H Piles Standard and Grades: We offer full-size H piles according to the following standards: ASTM A6, EN 10365, EN 10025, JIS A 5525 / JIS G 3192, GB/T 32285-2024. Common Steel Grades are ASTM A572 Gr.50, S235, S275, S355, S460, SS400, SM400, SM490, SM520, Q235B, Q275, Q345B/Q355B, Q390, Q420,

Quote for Free

W8 21 H-Pile for Sale — HEB 200 H Pile for Sale

GB-T 32285 H-Pile Drawing — H-Beam Drawing

H Pile Requirement According to GB/T 32285-2024

The GB/T 32285-2024 standard is a newest standard for H Pile products, it has set detailed specific requirements for H-section steel piles:

Tensile strength: ≥ 400 Mpa
Yield Strength: ≥ 235 MPa.
Low-Temperature Impact Test: Test temperature is set at –40°C,
Absorbed Energy: ≥ 27 J.
Dimensional Tolerances: Flange width deviation: ±2.5 mm,
Permissible Straightness Deviation: < 0.15% of the total length.

What is an H-Pile

H piles are also known as H beams, which have an H cross-section and are used as pile members. Featuring excellent mechanical properties, stable structural performance, and high adaptability, they are able to bear heavy loads and provide structural support. Now H Piles are an essential component in foundations, substructure works, and as a king pile in earth-retaining systems.

H Pile Applications: H piles are driven into the earth and rock layers by driving equipment, load from upper structures are transferred to the ground evenly. They are extensively applied in building foundation support, bridge substructures, port and waterfront works, and deep excavation retaining walls. It can be connected to U type sheet piles or larssen sheet piles to form a combi-wall system, or used singlely for temporary projects.

In high-rise building foundations, H-piles are used as bearing piles to ensure overall structural stability.
In bridge foundations, H-piles are commonly used as primary load-bearing piles in bridge foundations.
For deep excavation projects, H-piles help control ground deformation and maintain excavation safety throughout construction.

HP Pile and H Pile

HP pile and H pile are basically the same steel product type, the only difference is their standards.

H-Beam Pile Piling — H-Beam Pile Driving

HP piles are a type of bearing piles produced according to American steel standards (ASTM A6 / ASTM A992 / ASTM A572), it is an H beam pile serie for deep foundation load-bearing. H piles are commonly referred to as hot-rolled H-section steels produced according to EN, JIS and GB standards, it’s application is the same: earth retaining, temporary/permanent shoring, and pile foundations.

Available H Pile Sizes

GB Standard: China H piles standard GB/T 32285-2024 specifies the dimensions, profiles, weights, and permissible tolerances for hot-rolled H-sections. Common types include HW (wide-flange H-sections), HM (medium-flange H-sections), and HN (narrow-flange H-sections). Taking HW200×200 as an example, both its height and flange width are 200 mm, with an 8 mm web thickness and a 12 mm flange thickness. Its theoretical weight is approximately 50.5 kg/m. These different types are used in various engineering applications: HW sections are ideal for carrying large axial loads and biaxial bending; HM sections are commonly used in structural frames; and HN sections are typically used for beams or members subjected primarily to uniaxial bending.

JIS & EN Standard：Japanese H-shape sheet pile standards are widely used internationally. Common sizes include H200, H250, and H300. European H-shape sheet piles also have distinctive dimensions and performance characteristics. For example, in the HEA series, the HEA100 section has a height of 100 mm, a flange width of 106 mm, a web thickness of 5 mm, and an 8 mm flange thickness, with a unit weight of about 19 kg/m. The HEB series features larger sizes。

Common Sizes – H Pile Weight and Size Chart‌

AGICO supplies hot-rolled H piles according to various standards. here are the most common sizes for reference:

Specification	Weight Per Meter (kg/m)	h (mm)	b (mm)	a (mm)	c (mm)	r (mm)
HP200×200	43	200	205	9	9	10
HP200×200	53	204	207	11.3	11.3	10
HP250×250	53	243	254	9	9	13
	62	246	256	10.5	10.7	13
	85	254	260	14.4	14.4	13
HP310×310	64	295	304	9	9	15
	79	299	306	11	11	15
	93	303	308	13.1	13.1	15
	110	308	310	15.4	15.5	15
	125	312	312	17.4	17.4	15
HP360×370	84	340	367	10	10	15
	108	346	370	12.8	12.8	15
	132	351	373	15.6	15.6	15
	152	356	376	17.9	17.9	15
	174	361	378	20.4	20.4	15
HP360×410	105	344	384	12	12	15
	122	348	390	14	14	15
	140	352	392	16	16	15
	158	356	394	18	18	15
	176	360	396	20	20	15
	194	364	398	22	22	15
	213	368	400	24	24	15
	231	372	402	26	26	15

Section	Mass (G)	Dimensions				Steel Area	Perimeter	Moment Of inertia		Section modulus
kg/m	h mm	b mm	Tw mm	tf mm	cm2	cm2	y-y cm4	z-z cm4	y-y cm3	y-y cm3	z-z cm3
HP220x57.2	57.2	210	224.5	11	11	72.9	1.265	5729	2079	545.6	185.2
HP260x87.3	87.3	253	267	14	14	111.2	1.505	12590	4455	994.9	333.7
HP260x75	75	249	265	12	12	95.54	1.493	10650	3733	855.1	281.7
HP305x110	110	307.9	310.7	15.3	15.4	140.2	1.8	23560	7709	1531	495
HP305x126	126	312.3	312.9	17.5	17.6	161	1.813	27410	9002	1755	577.2
HP305x149	149	318.5	316	20.6	20.7	190	1.832	33070	10910	2076	688.8
HP305x180	180	326.7	319.7	24.8	24.8	229.3	1.857	40970	13550	2508	847.4
HP305x186	186	328.3	320.9	25.5	25.6	237	1.861	42610	14140	2596	879.3
HP305x223	223	337.9	325.7	30.3	30.4	285	1.891	52700	17580	3119	1081
HP305x88	88	301.7	307.8	12.3	12.4	111.6	1.782	18420	5984	1221	387.3
HP305x95	95	303.7	308.7	13.3	13.3	121.7	1.788	20040	6529	1320	425.1
HP320x103	103	307	306	14	14	131	1.764	22050	6704	1437	438.2
HP320x117	117	311	308	16	16	149.5	1.776	25480	7815	1638	507.5
HP320x147	147	319	312	20	20	186.9	1.8	32670	10160	2048	651.3
HP320x184	184	329	317	25	25	234.5	1.83	42340	13330	2574	841.2
HP320x88.5	88.5	303	304	12	12	112.7	1.752	18740	5634	1237	370.6
HP360x109	109	346.4	371	12.8	12.9	138.9	2.123	30630	10990	1769	590.7
HP360x133	133	352	373.8	15.6	15.7	168.5	2.14	37980	13680	2158	725.3
HP360x152	152	356.4	376.0	17.8	17.9	193.8	2.153	43970	15880	2468	842.3
HP360x174	174	361.4	378.5	20.3	20.4	221.7	2.169	51010	18460	2823	973.5
HP360x180	180	362.9	378.8	21.1	21.1	229.5	2.173	53040	19140	2923	1011
HP360x84.3	84.3	340	367	10	10	107.3	2.102	23190	8243	1364	449.2
HP400x122	122	348	390	14	14	155.9	2.202	34770	13850	1998	710.3
HP400x140	140	352	392	16	16	178.6	2.214	40270	16080	2288	820.2
HP400x158	158	356	394	18	18	201.4	2.226	45940	18370	2581	932.4
HP400x176	176	360	396	20	20	224.3	2.238	51770	20720	2876	1047
HP400x194	194	364	398	22	22	247.5	2.25	57760	23150	3174	1163
HP400x213	213	368	400	24	24	270.7	2.262	63920	25640	3474	1282
HP400x231	231	372	402	26	26	294.2	2.274	70260	28200	3777	14

Section	Model	Weight (kg/m)
HP200x53.5	204x207x11.3×11.3	53.5
HP220x57.2	210×224.5x11x11	57.2
HP260x75	249x265x12x12	75
HP260x87.3	253x267x14x14	87.3
HP305x78.4	299.3×306.4x11x11	78.4
HP305x88	301.7×307.8×12.4×12.3	88
HP305x95	303.7×308.7×13.3×13.3	95
HP305x110	307.9×310.7×15.3×15.4	110
HP305x126	312.3×312.9×17.5×17.6	126
HP305x149	318.5x316x20.6×20.7	149
HP305x180	326.7×319.7×24.8×24.8	180
HP305x186	328.3×320.9×25.5×25.6	186
HP305x223	337.9×325.7×30.3×30.4	223
HP320x88.5	303x304x12x12	88.5
HP320x103	307x306x14x14	103
HP320x117	311x308x16x16	117
HP320x147	319x312x20x20	147
HP320x184	329x317x25x25	184
HP360x84.3	340x367x10x10	84.3
HP360x109	346.4x371x12.8×12.9	109
HP360x133	352×373.8×15.6×15.7	133
HP360x152	356.4x376x17.8×17.9	152
HP360x174	361.4×378.5×20.3×20.4	174
HP360x180	362.9×378.8×21.1×21.1	180
HP400x122	348x390x14x14	122
HP400x140	352x392x16x16	140
HP400x158	356x394x18x18	158
HP400x176	360x396x20x20	176
HP400x194	364x398x22x22	194
HP400x213	368x400x24x24	213
HP400x231	372x402x26x26	231

Model (Width×Height)	Cross-Sectional Dimensions						Cross-Sectional Area cm²	Theoretical Weight kg/m	Surface Area per Meter m²/m	Moment of Inertia cm⁴		Radius of Gyration cm		Section Modulus cm³
Model (Width×Height)	H mm	B mm	t₁ mm	t₂ mm	r mm	Flange Thickness mm	Cross-Sectional Area cm²	Theoretical Weight kg/m	Surface Area per Meter m²/m	Iₓ	Iᵧ	iₓ	iᵧ	Wₓ	Wᵧ
240×240	240	240	10	17	21	17	106.0	83.2	1.38	11300	3920	10.3	6.08	938	327
250×250	250	250	9	14	13	14	91.43	71.8	1.46	10700	3650	10.8	6.31	860	292
254×254	247	255.5	10.7	10.7	13	10.7	80.27	63.0	1.47	8840	2980	10.5	6.09	716	233
	250	258	12	12	13	12	90.49	71.0	1.49	10100	3440	10.6	6.16	808	267
	254	260	14	14.2	13	14.2	106.9	83.9	1.50	12100	4170	10.7	6.24	956	320
260×260	249	265	12	12	24	12	95.54	75.0	1.49	10600	3730	10.6	6.25	855	282
	253	267	14	14	24	14	111.2	87.3	1.50	12600	4460	10.6	6.33	995	334
	260	260	10	17.5	24	17.5	118.4	93.0	1.50	14900	5130	11.2	6.58	1150	395
280×280	280	280	10.5	18	24	18	131.4	103	1.62	19300	6590	12.1	7.09	1380	471
300×300	300	300	10	15	13	15	118.5	93.0	1.76	20200	6750	13.1	7.55	1350	450
305×305	299	306.5	11.1	11.1	15	11.1	100.7	79.0	1.78	16400	5330	12.8	7.28	1100	348
	302	308	12.5	12.5	15	12.5	113.6	89.1	1.79	18700	6090	12.8	7.33	1240	396
	304	309	13.5	13.5	15	13.5	122.8	96.4	1.79	20400	6650	12.9	7.36	1340	430
	308	311	15.5	15.5	15	15.5	141.3	111	1.80	23700	7780	13.0	7.42	1540	500
	312	313	17.5	17.5	15	17.5	160.0	126	1.82	27200	8960	13.0	7.48	1750	572
	314	313	18.3	18.3	15	18.3	167.3	131	1.82	28700	9370	13.1	7.48	1830	599
	318	316	20.5	20.5	15	20.5	188.3	148	1.83	32700	10800	13.2	7.58	2060	684
	327	320	25	25	15	25	231.2	181	1.86	41300	13700	13.4	7.70	2530	856
	328	321	25.5	25.5	15	25.5	236.3	185	1.86	42400	14100	13.4	7.73	2590	879
	338	326	30.5	30.5	15	30.5	285.3	224	1.89	52900	17700	13.6	7.87	3130	1080
320×320	303	304	12	12	27	12	112.7	88.5	1.75	18700	5630	12.9	7.07	1240	371
	307	306	14	14	27	14	131.0	103	1.76	22100	6700	13.0	7.15	1440	438
	311	308	16	16	27	16	149.5	117	1.78	25500	7810	13.1	7.23	1640	507
	319	312	20	20	27	20	186.9	147	1.80	32700	10200	13.2	7.37	2050	651
	329	317	25	25	27	25	234.5	184	1.83	42300	13300	13.4	7.54	2570	841
350×350	344	348	10	16	13	16	144.0	113	2.04	32800	11200	15.1	8.83	1910	646
350×350	350	350	12	19	13	19	171.9	135	2.05	39800	13600	15.2	8.88	2280	776
356×368	346	370	12.8	12.8	15	12.8	137.7	108	2.12	30300	10800	14.8	8.86	1750	585
	351	373	15.6	15.6	15	15.6	168.2	132	2.14	37500	13500	14.9	8.96	2140	724
	356	376	17.9	17.9	15	17.9	193.9	152	2.15	43900	15900	15.0	9.05	2460	845
	361	378	20.4	20.4	15	20.4	221.5	174	2.17	50800	18400	15.2	9.11	2820	973
	363	379	21.2	21.2	15	21.2	230.6	181	2.17	53300	19300	15.2	9.14	2940	1020
368×400	348	390	14	14	14	14	155.7	122	2.20	34700	13900	14.9	9.43	1990	710
	352	392	16	16	14	16	178.3	140	2.22	40200	16100	15.0	9.49	2280	820
	354	394	18	18	14	18	201.1	158	2.23	45900	18400	15.1	9.56	2580	932
	360	396	20	20	14	20	224.1	176	2.24	51700	20700	15.2	9.62	2870	1050
	364	398	22	22	14	22	247.2	194	2.25	57700	23100	15.3	9.68	3170	1160
	368	400	24	24	14	24	270.5	212	2.26	63900	25600	15.4	9.74	3470	1280
	372	402	26	26	14	26	293.9	231	2.28	70200	28200	15.5	9.80	3770	1400
400×400	400	400	13	21	22	21	218.7	172	2.34	66600	22400	17.5	10.1	3330	1120
	400	408	21	21	22	21	250.7	197	2.35	70900	23800	16.8	9.74	3540	1170
	414	405	18	28	22	28	295.4	232	2.37	92800	31000	17.7	10.2	4480	1530
	428	407	20	35	22	35	360.7	283	2.41	119000	39400	18.2	10.4	5570	1930
	458	417	30	50	22	50	528.6	415	2.49	187000	60500	18.8	10.7	8170	2900
	498	432	45	70	22	70	770.1	604	2.60	298000	94400	19.7	11.1	12000	4370
410×410	389	398	13.7	13.7	30	13.7	166.3	131	2.29	46200	14400	16.7	9.31	2370	725
	394	400	15.9	15.9	30	15.9	192.5	151	2.30	54100	17000	16.8	9.39	2750	850
	400	403	19.1	19.1	30	19.1	230.8	181	2.32	65800	20900	16.9	9.51	3290	1040
	406	406	22.2	22.2	30	22.2	268.3	211	2.34	77500	24800	17.0	9.62	3820	1220
	413	410	25.4	25.4	30	25.4	308.0	242	2.36	90700	29300	17.2	9.75	4390	1430
	419	413	28.6	28.6	30	28.6	347.4	273	2.38	104000	33700	17.3	9.85	4960	1630
460×460	445	451	19.1	19.1	30	19.1	257.7	202	2.60	91900	29200	18.9	10.7	4130	1300
	451	454	22.1	22.1	30	22.1	298.3	234	2.62	108000	34500	19.0	10.8	4780	1520
	457	457	25.4	25.4	30	25.4	343.1	269	2.64	125000	40500	19.1	10.9	5490	1770
	464	460	28.6	28.6	30	28.6	387.2	304	2.66	144000	46500	19.3	11.0	6200	2020
500×500	500	500	25	25	26	25	368.3	289	2.91	163000	52200	21.0	11.9	6520	2090

Quote for Free

H Piles VS Tubular Piles and Concrete Piles

H Piles are one of the most frequently used pile type, it is widely used as the king piles of combi-wall system and bearing piles for high-strength, low cost in production and installation, compared with tubular piles and concrete piles, it has the following advantages:

Superior load-bearing performance: The H section consists of a web (vertical plate) and flanges (horizontal plates), which forms a stable load-resisting structure that provide 10–15% more higher load capacity than conventional I-shape piles at the same weight, and offer better balanced bending performance than tubular piles in bridge foundation construction.
Higher construction efficiency: The H section is an optimized soil contact profile, H pile driving has low driving resistance and can rapidly penetrate into the ground. H-piles can also be easily spliced for large length, the installation efficiency is typically 30% faster than that of precast concrete piles.
Better cost-effectiveness: H Pile has lighter self-weight (more than 60% lighter than concrete piles for equivalent load capacity), transportation and installation costs are less.
Low Production Cost: Hot rolling process of H piles is a single forming process, H Piles are produced with high manufacturing efficiency and a lower production cost compared with cold-formed H-piles.

How to Make an H Pile Order from AGICO

When purchasing hot-rolled H-section steel piles, please provide the ordering information and fabrication requirements in details.

H-Pile Steel Equivalent Steel Grade

EN (Europe)	ASTM (USA)	JIS (Japan)	GB (China)	Equivalence Notes
S235	A36	SS400	Q235B	Low-strength structural steel.
S275	–	SM400	Q275	Similar mid-range strength.
S355	A572 Gr.50 / A992	SM490	Q345B, Q355B	Most common grade for H-piles globally.
S420	A572 Gr.55	SM520	Q390	Higher strength structural grade.
S460	A572 Gr.60–65	–	Q420	For heavy-duty piling and large H-sections.

H Pile Sizes:
You should send AGIO with detailed dimensional infomation, including the H pile’s height, flange width, web thickness, and flange thickness, send a drawing if you have it. In addition, the required steel grade must be noted.

Steel Grade:
For H Piles of China standard, the grade of an H-section steel pile is composed of a letter indicating yield strength (for example, Q represents “yield strength”), a numerical value of the yield strength, and a quality grade symbol (such as A, B, C, or D, where different grades indicate different levels of impact toughness and other mechanical properties).

For example, Q355B is the steel grade with a yield strength of 355 MPa for H beam, customer should select proper steel grades based on design requirements and service conditions. If you require H piles withhigher toughness or greater impact loads, choose higher steel grades.

Buy H Piles Now