HEA HEB HEM Beams

European Standard – EN10025 HEA|HEB|HEM Beam

AGICO supplies European standard H beams covering the HEA, HEB, and HEM series, manufactured in accordance with EN 10025. We also offer pre-assembled structural fabrication services, including Steel Structure Beam/Column, Bridge Girder Components, Built-up Beam, Truss Member, Industrial Frame and H Piles etc. Fabrication process covers hole drilling, beveling, welding connection plates, stiffener plates, base plates.

These H-beam products, with their advanced shape design and mechanical properties, find widespread application in construction, bridges, and heavy machinery structures globally，AGICO can supply H beams of other national standards. H-beam dimension standards follow EN10365 and EN10034:

• EN 10365 is a European standard on steel sections and channels that discusses the shape and dimensions of the steel sections and channels.
• EN10034 specifies tolerances on shape dimensions and mass of structural steel I and H sections. 

The European H beam prices vary depending on the steel grade, specification, and manufacturer; the exact price needs to be determined based on the series and dimensions.
Contact AGICO now if you need the latest European H beam price!

Hot Sale H Sections – HEA Beam | HEB Beam | HEM Beam

HEA, HEB and HEM beams are produced as hot-rolled, EN 10025 standard specifies H beams and other steel profile technical delivery conditions, chemical composition, mechanical properties, and impact toughness.

Most common EN 10025 parts for H‑beams

Standard	Applicable Standards	Grade	Dimension Standard	Model / Specification
European Standard	EN 10025	S235JR/J0 S275JR/J0 S355JR/J0	EN 10365 EN 10034	HE200A/B, HE240B/M, HE260B/M, HE280B/M, HE300B, HE140A, IPE140, IPE160

• HEA Beam: The size range extends from 96mm × 100mm × 5mm × 8mm to 890mm × 300mm × 16mm × 30mm. Specific sizes include HEA100, HEA120, HEA140, up to HEA1000, etc. The section height can range from 100mm to 890mm, with relatively narrow flanges, and the cross-section presents a protruding profile.
• HEB Beam: The size range extends from 100mm × 100mm × 6mm × 10mm to 900mm × 300mm × 18.5mm × 35mm. Specific sizes include HEB100, HEB120, HEB140, up to HEB900, etc. The section height can range from 100mm to 900mm, with wide flanges, and the cross-sectional dimensions and weight are moderate.
• HEM Beam: The size range is similar to HEB sections with wider flange, resulting in larger cross-sectional dimensions and weight. Common HEM series sizes include HEM100, HEM120, HEM140, etc.

How EN 10025 grades are named (example for H‑beam material)

• S 355 J2 + N – used for HEB 300 beams.
• S = Structural steel
• 355 = Minimum yield strength (MPa) for thickness ≤16 mm
• J2 = Impact test at −20 °C (27 J minimum)
• +N = Normalized rolling (optional, improves toughness)

HEA HEB HEM Beams Specification- Hot Sale H Sections

HE Series (European I Beams)

IPE Series (European I Beams)

Why Choose EN 10025 for H‑beams from AGICO

• CE marking – H‑beams sold in the EU must comply with EN 10025 and carry CE label.
• Weldability – Standard grades (S235, S275, S355) have controlled carbon equivalent (CEV) for easy welding without preheat (for thickness ≤25 mm).
• Low temperature safety – J2 and K2 grades are mandatory for H‑beams used in cold climates or dynamic loads (cranes, bridges).
• Cost efficiency – Using S355 instead of S235 allows lighter H‑beam sections (15‑25% weight reduction).

Note: H‑beam dimensions (height, flange width, web thickness) are governed by EN 10365 (formerly EN 10034), while EN 10025 provides the material properties. Both standards together define a complete European H‑beam product.

Chemical Composition According to EN10025

Note: Grades not listed in the table above can be customized according to relevant standards or technical agreements (as per original remark). Empty cells indicate values not specified in the source document.

Mechanical Properties According to EN10025

Note: Values are extracted directly from the source image. The table includes typical data for S235, S275, S355 and an extra row with -20°C / 40J. Some impact values (e.g., 23J, 22J, 20J) differ from standard 27J – they are kept as shown in the original material. For grades not listed, custom requirements may apply according to technical agreements.